MOTION tab
Motion menu
From the Motion menu you can define the point-cloud view mode.
|
|
Display the point-cloud in first-person view in the scanner coordinate frame. |
|
|
Display the point-cloud in first-person view, relative to the Earth's horizontal plane.. |
|
|
Display the point-cloud in third-person view, relative to the GS84 coordinate frame. |
|
|
Keep the current point-cloud frame in the centre of the work area.. |
Tip
and 
are only available if positional data has been loaded in Purepoint
Tip
is only available when is enabled.
Snail Trail menu
|
|
Enable multiple point-cloud frames to be displayed at the same time. |
Information
Frames can be set to a value between 2 and 10.
Information
Intervals can be set to a value between 1 and 10.
Information
You cannot set frames and intervals to the maximum value.
When intervals are set to 10, frames can only be set to a maximum of 9.
When frames are set to 10, intervals can only be set to a maximum of 9.
Tracks menu
From the Tracks menu you can enable or disable scanner and camera paths.
|
|
Display the scanner flight path. Select |
|
|
Display the camera path. |
