VIEW tab

Visualisation menu

From the Visualisation menu you can lock the view to the x- and y-axis.

	Lock the view to the horizontal y-axis view.
	Lock the view to the horizontal negative y-axis view.
	Lock the view to the horizontal negative x-axis view.
	Lock the view to the horizontal x-axis view.
	Lock the view to center.

From the Lock menu you can lock the frame viewer view.

	Disable rotation.
	Lock the z-axis and view so it stays planimetric but can be rotated
	Rotate the view to the North and lock the view to allow only up-down rotation.

Tip

When Lock Rotation is enabled, the view can still be changed using the options in the Visualisation menu, see "Visualisation menu"

From the Depth Slice you can enable the depth slice tool.

	Enable the depth slice tool and display only points within the depth slice tool's range.
	Allow rotation of the display without affecting the visibility of points controlled by the depth slice settings